Home > 250S 250SE 280S 280SE 280SEL
W108 (1965-1972)
> Engine & Underhood >


Clamp - 18mm - for Coolant/Heater Lines, etc.
Clamp - 18mm - for Coolant/Heater Lines, etc.
Clamp - 18mm - for Coolant/Heater Lines, etc.


 
Clamp - 18mm - for Coolant/Heater Lines, etc.
Our Price: $4.60

Stock Status:In Stock

Product Code: AUTH-008391
Qty:

Description Technical Specs Manufacturers Product Number
 
Clamp - 18mm

For Coolant/Heater lines to Chassis, Engine Bay, Engine, Etc.
also used on other applications


Fits most 100, 108, 109, 110, 111, 113, 114, 115Ch Models

Yellow Zinc Plated Steel
New Part - Made in Germany

Accessories for this product...
Fuel Drain/Overflow Line Clamp - fits Mercedes 190SL Clamp for Wiring Harness, Fuel & Brake Lines - 6mm ID x 24mm Length Clamp for Main wiring harness - 30mm - 230SL 250SL 280SL 300SL & other models Clamp for 190SL Hot Start Control Cable at Carburetor
Our Price: $29.72

Add
Our Price: $4.95

Add
Our Price: $9.45

Add
Our Price: $6.85

Add
Fuel Overflow Line Clamp - fits Mercedes 190SL Clamp for Wiring, Fuel Brake Lines -6mm - 230SL 250SL 280SL & other models Clamp for Main wiring harness - Mercedes 230SL 250SL 280SL 300SL & other models Clamp for Mercedes 190SL Hot Start Control Cable
Clamp for Control Cables, Wiring & Tubing - 6mm ID x 20mm Clamp for Wiring Harness & Fuel Lines - 20mm - 230SL 250SL 280SL & other models Clamp for 12mm Diameter Cable / Hose / Tubing - OE Mercedes Mounting Clamp for Overflow Pipe to Bracket on 190SL Carburetor
Our Price: $6.94

Add
Our Price: $8.28

Add
Our Price: $6.55

Add
Our Price: $19.85

Add
Clamp for Control Cables, Wiring & Tubing - 6mm ID Clamp for Wiring Harness & Fuel Lines - 20mm - 230SL 250SL 280SL & other models Clamp for 12mm Diameter Cable / Hose / Tubing Mounting Clamp for Overflow Pipe to Bracket on 190SL Carburetor
Mounting Clamp for Fuel Line to Engine on 190SL Carburetor Mounting Clamp for Overflow Pipe to Thermostat on 190SL Carburetor
Our Price: $58.20

Add
Our Price: $14.40

Add
Mounting Clamp for Fuel Line to Engine on 190SL Carburetor Mounting Clamp for Overflow Pipe to Thermostat on 190SL Carburetor

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 August 26, 2022
Reviewer: Charles Blackwell from Griffin, GA United States  


Was this review helpful to you?


Browse for more products in the same category as this item:

250S 250SE 280S 280SE 280SEL
W108 (1965-1972)
> Engine & Underhood
300SEL W109 (1965 -1972) > Engine & Underhood
250SE/C 280SE/C 220b/Sb/Seb
W111 (1959-1971)
> Engine & Underhood
230 250/C 280/C
W114 (1967-1976)
> Engine & Underhood
220 220D 230 240D 300D
W115 (1967−1976)
> Engine & Underhood
230SL 250SL 280SL
W113 (1963−1971)
> Engine & Underhood
250S 250SE 280S 280SE 280SEL
W108 (1965-1972)
> Hardware & Miscellaneous
300SEL W109 (1965 -1972) > Hardware & Miscellaneous
190 200 230
W110 (1961-1968)
> Hardware & Miscellaneous
250SE/C 280SE/C 220b/Sb/Seb
W111 (1959-1971)
> Hardware & Miscellaneous
230 250/C 280/C
W114 (1967-1976)
> Hardware & Miscellaneous
220 220D 230 240D 300D
W115 (1967−1976)
> Hardware & Miscellaneous
230SL 250SL 280SL
W113 (1963−1971)
> Hardware & Miscellaneous
190 200 230
W110 (1961-1968)
> Engine & Underhood
230SL 250SL 280SL
W113 (1963−1971)

190 200 230
W110 (1961-1968)

230 250/C 280/C
W114 (1967-1976)

250S 250SE 280S 280SE 280SEL
W108 (1965-1972)

250SE/C 280SE/C 220b/Sb/Seb
W111 (1959-1971)

220 220D 230 240D 300D
W115 (1967−1976)

300SEL W109 (1965 -1972)